Datamax Error Codes
Professional Advice by Certified Technicians
Datamax-O’Neil I-Class Mark II I-4606 Error Code Host Changes Pending
Problem Description The host has pending configuration changes that require a “host reset command.” Corrective Action to save the changes…
Datamax-O’Neil I-Class Mark II I-4606 Error Code Head Needs Cleaning
Problem Description the scheduled printhead cleaning distance has been reached. Corrective action Press and hold the TEST key or select…
Datamax-O’Neil I-Class Mark II I-4606 Error Code Goodbye
Problem Description Power has been removed and shutdown is in progress. Corrective Action The power switch was turned OFF; a…
Datamax-O’Neil I-Call Mark II I-4606 Error Code Gap Mode Warning Low Backing
Problem Description The printer measured only a small difference between the “empty” and “gap” sensor readings. Corrective Action Transparent backing…
Datamax-O’Neil I-Class Mark II I-4606 Error Code Dot Failure
Problem Description The printer has detected defective printhead elements. Corrective Action Replace the printhead if the print quality becomes unacceptable.
DT390 is end of life
DT Research has made the DT390 and end of life product. by Rugged Ralph How it’s going guys? I was…
Datamax-O’Neil New Thermal Printer Line
Sneak peak at the new series of thermal printers coming from Datamax-O’Neil By: Timmy Thermal Hey everybody, I got some…
Datamax-O’Neil w1110
Printer Type: Direct Thermal Printer Length Range: 0.25″ – 99″ [6.3mm – 2514mm] Resolution: 300 dpi [12 dots/mm] Printhead: 4″…