Zebra Printer Repair Service Scottsdale, AZ

Zebra printer repair scottsdale

Zebra Printer Repair Scottsdale

Zebra printer repair in the Scottsdale area call (800) 643-2664 for fast and reliable service.
zebra printers
At MIDCOM we have 3000 certified technicians throughout North America, including some in the Scottsdale general area. Our A+ rating and nearly 30 years of experience make MIDCOM the logical choice for all your Zebra Printer Repair needs.
onsite printer repair technician

zebra technologies logo

Schedule Onsite Zebra Printer Repair Now!
Fill out form or call our service hotline (800) 643-2664

We do not repair or sell card printers


Why We Are The FASTEST For Zebra Printer Repair in the Scottsdale Area!

Live Service Specialists
Talk to a live person right away – NO PROMPTS!
Faster Scheduling
Schedule service in less than 5 Minutes
Largest Service Fleet
3,500 certified technicians are standing by
Affordable Rates
Great low prices backed by a guarantee

Where ever you are in the Scottsdale area, we can help!


  • Priority Response
  • Fix or Replace Protection
  • 6 Business Hours Onsite
  • All Parts Included
  • Unlimited Service Calls
  • Largest Nationwide Service



Find your Zebra barcode label printer below:


zebra thermal label printer repair

Zebra thermal label printers we repair in Scottsdale

ZT610, ZT620, ZT510, ZM4+, 110xiI, 110xiII, 110XiIII, 110xi4, 140XiI, 140XiII, 140XiIII, 140xi4, 170XiI, 170XiII, 170XiIII, 170xi4, 220xiI, 220xiII, 220xiIII, 220Xi4, 110XiIIIPlus, 140XiIIIPlus, 170XiIIIPlus, 220XiIIIPlus, Z Series, ZM400, ZM600, 105SL, S4M, EM 220, 90XiI, 90XiII, 90XiIIIplus, S300, S400, S500, S600, Z4000, and Z4M.



Is your Zebra a thermal transfer or direct thermal printer?

Find out now click here >>


ZEBRA PRINTER SERVICE SCOTTSDALE

Live Operators at (800)643-2664 are available to speak with you about Zebra Printer Service in Scottsdale Arizona. If you need assistance in Cave Creek, Carefree, Rio Verde, Fountain Hills, Mesa, Tempe, Gilbert, Chandler, Apache Junction, and San Tan Valley, our experienced technicians will be out to provide fast, reliable service to your Zebra printers. If you have printers that you just aren’t sure are worth fixing, use our Depot service. Send MIDCOM your printer to evaluate, if we are unable to repair it, there is no charge for our labor. We have 30 years experience to back up our work. Give us a call today.


ZEBRA PRINTER MAINTENANCE SCOTTSDALE

If you call MIDCOM at (800)643-2664, we can arrange maintenance of your Zebra printer in Scottsdale, Arizona. We have maintenance service contracts that allow you to budget for your Zebra printer needs and avoid any unexpected repair expenses. With 3000 certified technicians nationwide, we have technicians in the Scottsdale area that can service your printers quickly with expert knowledge.


ZEBRA PRINTER REPAIRS SCOTTSDALE

For repairs for your Zebra Printer, call (800)643-2664. One of our live representatives will set up an appointment with a certified technician right in the Scottsdale area. Since 1982, MIDCOM has proven professional and expert service that has earned an A+ rating with the Better Business Bureau. Our service technicians are backed by a 30 day guarantee. Ask our representative, about the Maintenance Service Contract and take the uncertainty out of printer repair costs.


ZEBRA PRINTERS SCOTTSDALE

MIDCOM provides support for Zebra Printers in the Scottsdale, AZ area. Call (800)643-2664 and speak to our service representative regarding repair services or maintenance contracts. Our certified have the knowledge to troubleshoot your printer issues, as well as, provide proper maintenance to ensure the life of your Zebra printer. Customers in the 85310, 85308, 85306, 85304, 85302, 85301, 85303, 85305, 85307, and many other zipcodes, can count on us for fast and professional service. Our customers have counted on us for nearly 30 years. You can depend on us too.


Zebra Printer Maintenance

10 Rules To Keep Your Zebra Printer Operational

  1. One of the greatest failures occurring in Zebra thermal barcode printers is due to the printheads not
    being cleaned regularly. A good rule of thumb is to clean the printhead on each of your Zebra thermal
    printers every time you replace a ribbon or roll of paper. It takes only about a minute and this
    action could save you thousands of dollars over the life of the printer. Follow the instructions in
    your User’s Manual as to the type of cleaning solvent to be used for your specific model.
  2. If you feel you are burning out printheads too often on your Zebra thermal printer, you may want to
    check your User’s Manual for the recommended heat and darkness settings. An incorrect
    setting often will reduce the printhead life and could cost you thousands of dollars over the life of
    the printer.
  3. Dust residing on the Media Sensor can cause major service issues. The Media Sensor is the
    mechanism that insures that the gap between the paper and the printhead remains constant.
    Most people purchase a bottle of “canned air” and simply give the Media Sensor a few quick
    blasts of air, which will usually clear out any dust residue left over from the roll paper. You
    should consider doing this regularly, every time you change the ribbon or a roll of paper. It will
    only take a few seconds and it will ensure more up-time.
  4. If you are using a ribbon in your Zebra thermal printer, be sure that it is a good quality ribbon. Lower
    cost ribbons are often not manufactured to the exact wax and/or resin specifications of your
    printer and could cause a wax build-up on the platen. Wax build-up can cause poor print quality
    resulting in barcode reliability issues.
  5. If you are using a Zebra thermal printer that does not use a ribbon (typically called a Direct Thermal
    printer vs. a Thermal Transfer printer that does use ribbons) and you are constantly having
    problems with defective printheads, you may want to consider either changing your printer to a
    Thermal Transfer printer or using a better quality paper. A Thermal Transfer printer, due to the
    position of the ribbon between the printhead and the label paper, can greatly extend the life of
    thermal printheads, as paper is not directly rubbing against the printhead itself and causing
    friction.
  6. A good rule of thumb, when purchasing new ribbons on Zebra thermal transfer printers, is to purchase
    a ribbon that is slightly wider than the actual labels that you are using. For instance, if the label
    that you are using is 4.1″ in width, then you may want to consider purchasing ribbons that are
    4.33″ in width.
  7. Are you wearing out printheads? If so, here is something you may want to check. Be sure that
    you are not using low grade label paper if you are using Direct Thermal printers. Often bargain
    priced rolls of paper really are not a “bargain”. Why? Because low grade paper often is coarser
    and can cause more wear on the printheads. We have seen situations with even as high as
    50% more wear on the printhead. As you may know, printheads in thermal printers are very
    expensive. It may make sense to pay a little more for paper, as it is a fraction of the cost
    compared to replacing printheads more often. Remember, the manufacturers of thermal
    printers consider the printheads as consumables that the end-user is responsible to replace.
    These consumables run into the hundreds of dollars each.
  8. Do you have burned-out printhead elements on your thermal printer? Here is how to tell with a
    PAUSE TEST. There may be situations where it looks like information is missing on your labels
    and/or barcodes when they are being printed. There is always a chance that one or more of the
    print elements in your thermal printer printhead may be burned out. Before calling someone for
    Zebra thermal printer repair, you may want to try this simple test that only takes a few moments to see
    if in fact it is your print elements. Keep in mind that some manufacturers considers printheads
    as consumables and they must be replaced from time to time. Typically, this is performed by a
    qualified Zebra printer repair technician. This self test can be used to print test labels when you make
    adjustments to the thermal printer’s mechanical assemblies to determine if any of the printhead
    elements are not working.
  9. What are printer and print server alerts? Should you pay attention to them? Alerts give you the
    ability to proactively manage your Zebra thermal printer and print server. If the printer or print server
    has an error, you would be sent an alert notifying you of the situation. The manufacturer Zebra
    uses ZebraNet Bridge that gives you control to monitor your bar code printers from anywhere,
    and documents the alerts to a log file. A soon as ZebraNet Bridge receives an alert, the alert
    appears in the Events tab. If you have not viewed the alert yet in the Events tab, the box in the
    status bar at the bottom of the application shows:

     New alert
     Alert type
     Alert severity by color

    You can configure ZebraNet Bridge to notify you by blinking the application tab in the task bar.
    Remember, ZebraNet Bridge only logs alerts that occur while the application is running. A good
    Zebra repair company sees this issue often and will be able to supply you with a new Zebra
    printhead and will also fully check out your Zebra printer. A steady program that includes Zebra
    printer maintenance will help you keep your printer up and running longer. Check with the
    manufacturer of your thermal printer to see what they offer to manager your thermal printer.

  10. Clean the exterior and interior area of your Zebra thermal printer often. To keep your Zebra thermal printer
    running optimally, remember to clean the interior and exterior of the printer. When these areas
    are dirty, the chance of debris getting into the wrong area is increased. To clean the exterior
    surfaces of the printer use a lint-free cloth. Do not use harsh or abrasive cleaning agents or
    solvents. If necessary, a mild detergent solution or desktop cleaner may be used sparingly. You
    should inspect the interior area after every four rolls of media. Remove any dirt and lint from the
    interior of the printer using a soft bristle brush and/or vacuum cleaner. A good Zebra thermal printer
    repair company sees this issue often and will be able to supply you with a new Zebra thermal printer
    printhead and will also fully check out your Zebra thermal printer. A steady program that includes
    Zebra thermal printer maintenance will help you keep your Zebra thermal printer up and running longer.

thermal label printers refurbished

800-643-2664