Zebra 105SL Plus Error Code Ribbon Out
Possible Cause: In thermal transfer mode, ribbon is not loaded or incorrectly loaded.
Solution: Load ribbon correctly.
Possible Cause: In thermal transfer mode, the ribbon sensor is not detecting ribbon.
Solution:
1. Load ribbon correctly.
2. Calibrate the printer.
Possible Cause: In thermal transfer mode, media is blocking the ribbon sensor.
Solution:
1. Load media correctly.
2. Calibrate the printer.
Possible Cause: In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly.
Solution:
1. Print a sensor profile. The ribbon out threshold is likely to high, above the black area that indicates where the ribbon is detected.
2. Calibrate the Printer.
Possible Cause: If you are using direct thermal media, the printer is waiting for the ribbon to be loaded becuase it is incorrectly set for thermal transfer mode.
Solution:
Possible Cause:
Solution: Set the printer for Direct Thermal mode.
Fill out form or call (800) 643-2664
Keep Your Thermal Label Barcode Printer Running! Download Our FREE eBook Now!