Zebra Industrial Printers Adjusting The Ribbon Strip Plate
Adjusting the ribbon strip plate on a Zebra industrial printer can be easily done.
Watch the video below.
Step-By-Step Instructions To adjust the ribbon plate on Zebra industrial printers
To adjust the ribbon strip plate on a Zebra industrial printer, you can try these steps:
- Turn on the printer while holding down the pause key
- Print a PAUSE key self test label
- When the label prints, press the pause key
- Observe the ribbon for problems like wrinkling
- Loosen the two Phillips screws that hold the strip plate to the printhead assembly
- Turn the ribbon take-up spindle so the ribbon lifts the strip plate off the media
- Reverse the spindle so the strip plate lightly touches the media
- Press pause to resume printing
- Print at least 25 labels and check for problems