Zebra Industrial Printers How To Calibrate The Color Touch Screen

Watch the video below.

Step-By-Step Instructions To calibrate the color touch screen on the Zebra industrial printer

To calibrate the color touchscreen on a Zebra industrial printer, follow these general steps. Note that the exact procedure may vary slightly depending on your specific model (e.g., ZT410, ZT420, ZT230, etc.), so it’s always a good idea to consult your printer’s user manual for model-specific instructions.

Steps to Calibrate the Touchscreen on Zebra Industrial Printers:

1. Turn on the Printer:

   – Power up the printer by pressing the power button. Wait for the printer to boot up completely.

2. Access the Home Screen:

   – If you’re not already on the home screen, press the “Home” button or navigate to the main screen.

3. Enter the Settings Menu:

   – Tap the “Menu” icon (often represented by a gear or similar symbol) to access the settings.

4. Navigate to the Calibration Option:

   – Within the settings menu, look for a section related to the touchscreen or display.

   – This option might be labeled something like “Touchscreen Calibration” or “Display Calibration”.

5. Start Calibration:

   – Select the calibration option. The printer will prompt you with a message to begin calibration.

   – You will likely be asked to tap on specific points on the screen, usually indicated by crosshairs or dots. Use a stylus or your finger to gently tap the points as instructed on the screen.

6. Follow On-Screen Instructions:

   – The touchscreen will typically guide you through the process by showing a series of dots or targets on the screen. Tap each dot in order to calibrate the screen’s touch response.

   – If you make a mistake, the system might allow you to restart the calibration.

7. Save Calibration Settings:

   – Once you’ve successfully tapped all the points, the printer will save the calibration settings. It may prompt you with a confirmation message when the process is complete.

8. Exit Calibration:

   – After saving, exit the calibration menu by selecting “Exit” or “Done”.

9. Test the Touchscreen:

   – After calibration, test the touchscreen by trying to select various options on the screen. If the calibration was successful, the touchscreen should now respond more accurately to your touch.

Troubleshooting Tips:

– Unresponsive Screen: If the screen is not responding to touch, ensure that there’s no debris or residue on the touchscreen, and try cleaning it with a soft cloth.

– Calibration Issues: If the screen still isn’t responding properly after calibration, you might need to repeat the process or reset the printer to its default settings and try again.