Zebra Stripe S600 203dpi Refurbished Certified

Our refurbishment process

The following parts are carefully inspected and/or tested on every thermal printer and where we believe a part is defective or worn, we replace that part as needed: ribbon feed spindle, ribbon take up spindle, platen, rollers, bearings, drive motor, belts, logic board, ribbon sensor, media sensor, control panel, display panel, power supplies, housing components are cleaned/or painted & replaced as necessary, and brand new print head added. Each unit undergoes stringent testing and quality control procedures before being shipped. Our printers ship with a 90 day limited return to MIDCOM service center warranty.

Zebra Stripe S600 203dpi refurbished

Full-size, Economical Printer Full-size, eight-inch O.D. media roll accommodation Multiple media handling options (e.g. cutter, rewind) Affordably priced
Simple, Reliable Operation Easy-to-use, color-coded operator cues Innovative, ribbon release mechanism for simplified ribbon replacement Toggle-pressure printhead for optimum print quality
State-of-the-art Technology Flash memory (standard on S600) Auto-calibration Auto-synchronization of serial ports Standard bar code and 2D symbology algorithms reside in memory for faster printing

Print methods: Thermal transfer or direct thermal

Zebra’s E3® Printhead Energy Control

Construction: Polycarbonate plastic case

Label tear-off feature

Auto-calibration

Smooth scalable fonts

Auto-synchronization of serial ports

15 standard bar codes and seven two-dimensional

Zebra Programming Language (ZPL® & ZPL II®)

Universal language for Zebra printers. Simplifies label

Transmissive sensor formatting and enables compatibility with other

Fully enclosed 8″ O.D. media compartment Zebra printers.

Operating Characteristics for the Zebra S600

Environment

Operating Temp. 40°F/5°C to 105°F/40°C

Storage/Environ. -40°F/-40°C to 140°F/60°C

Operating Humidity 20-85% non-condensing

Storage Humidity 5-85% non-condensing

Electrical

Internal automatic switching power supply 11 0VAC +/-20%, 230VAC +/-15%, 47-63Hz

S600 Communication Interface Capabilities

Auto-synchronizing RS-232C serial port

Error detection CRC protocol

Agency Approvals

CSA 22.2 (No. 950); UL 1950; CISPR 22 (Class B); IEC

950/EN 60950; 801-2, -3 and -4 standards; FCC

(Class B); CE compliance

Media Characteristics for the Zebra S600

For optimum print quality and printer performance, use Genuine Zebra supplies.

Zebra S600 Labels

Max. Roll Size

8″/203mm O.D. on a 3″/76mm I.D. core

Thickness (label & liner)

.0023″/.058mm-.012″/.305mm

Zebra S600 Media Type

Continuous or fanfold, die-cut, black mark, perforated, notched, tag stock

Ribbons

Ribbon is recommended to be at least as wide as media.

Max. Roll Size

3.2″/81mm O.D. on a 1″/25.4mm I.D. core

Standard Lengths

1,476’/450m; provides 3:1 media roll to ribbon ratio

Ribbon Set-up

Ribbon wound ink side out

Zebra S600 Fonts/Graphics/Symbologies

Fonts and Character Sets

Standard Fonts: 9 bitmapped (16 in S400), 1 smooth

scalable (CG Triumvirate™ Bold Condensed)

Sets: IBM® Code Page 850 International character set

Optional European and Asian font sets

Graphic Features for Zebra S600

Supports user-defined fonts and graphics—including

custom logos

ZPL II drawing commands—including boxes and lines

S600 Bar Code Symbologies

Linear Bar Codes: Code 11, Code 39, Code 93, Code

128, UPC-A, UPC-E, EAN-8, EAN-13, UCC/EAN 128,

UPC and EAN 2 or 5 digital extensions, Plessey, POSTNET,

Standard 2 of 5, Industrial 2 of 5, Interleaved 2 of

5, LOGMARS, MSI, Codabar

Two-Dimensional: CODABLOCK, PDF-417, Code 49,

DataMatrix, Maxi Code, QR Code, Micro PDF-417

Zebra S600 Options and Accessories

Up to 8MB Flash memory

Cutter; Label peel-off

Reflective media sensor

ZebraNet® PrintServer II (for Ethernet connectivity)

BAR-ONE® software

European and Asian font sets