Zebra ZT231 How To Unbox

Watch the video below.

Step-By-Step Instructions To Unbox The Zebra ZT231

Here’s a clear guide to unboxing and setting up your Zebra ZT231:

1. Unbox Carefully
• Slide the ZT231 out of its packaging.
• You should find the printer, power cord, USB cable, and a Quick Start Guide
• Keep the box and packing materials in case you need to ship or store it later
2. Make Connections
• Remove any port blocking tape from the USB port.
• Plug the USB cable into the printer and your computer
• Attach the power cord and plug it into a 100–240 VAC outlet
3. Power On
• Locate the power switch (typically on the side or back) and turn the printer on
4. Open Media Bay
• Lift the front media/printhead cover to access the inside
5. Release Printhead
• Unlock the printhead latch (lever or knob), lift it, and expose the platen & media path
6. Load Media & Ribbon
• Insert your label roll and, if using thermal transfer, load the ribbon correctly following diagram instructions.
• Close the printhead (lever back down).
7. Calibrate & Test
• Press the PAUSE button; the printer will auto‑calibrate, feed labels, tighten the ribbon, and align media
• Print a test label to verify everything is feeding and printing correctly