Zebra ZT410 Media Handling Options

Watch the video below.

Step-By-Step Instructions To Do Media Handling Options On The Zebra ZT410

Here’s a breakdown of the media-handling options available for the Zebra ZT410 — what kinds of media it can use, and how you can configure it for different workflows.

Supported Media Types & Sizes

• Media types: continuous roll, die-cut labels, notch labels, black-mark media (i.e. pre-printed marks on liner), and standard tag/label stock.
• Label/web width (media + liner):
• For tear-off or cutter configurations: 1.00 in (25.4 mm) to 4.50 in (114 mm)
• For peel or rewind configurations: 1.00 in (25.4 mm) to 4.25 in (108 mm)
• Maximum non-continuous label (i.e. individual label) length: up to 39 in (991 mm)
• Maximum media roll size (outer diameter): up to 8.0 in (203 mm) on a 3 in (76 mm) inside-core.
• Media thickness: between 0.0023 in (0.058 mm) and 0.010 in (0.25 mm) (this includes liner if any).

Media Handling Modes / Options

The ZT410 offers several different media-handling configurations, depending on how you want labels output or processed.

What This Means in Practice

• If you print small batches and apply labels by hand, tear-off or peel-off is often simplest.
• If you’re printing lots of labels for storage or later use, rewind helps keep organization.
• If you need individual labels cut cleanly (e.g. tags, tickets, custom lengths), then cutter is ideal.
• For continuous media printing (e.g. long receipts, wristbands, receipts), combining continuous media + cutter or continuous + rewind gives flexibility.
• If using thermal transfer (with ribbon), the ribbon-spindle and media-thickness support means you have good compatibility with standard label materials.