Zebra 105sl Error Code Paper Out

Key features of the Zebra 105SL printer typically include:

Thermal Transfer and Direct Thermal Printing: The printer can use both thermal transfer and direct thermal printing methods, making it suitable for various label and tag materials.
High-Speed Printing: It offers relatively fast print speeds, making it suitable for environments that require efficient and high-volume label printing.
Durable Construction: The Zebra 105SL is built to withstand industrial environments, with a robust metal construction that can endure challenging conditions.
Connectivity Options: It supports various connectivity options, including USB, serial, and parallel ports, as well as Ethernet for networked printing.
Label and Ribbon Handling: The printer typically includes features for easy label and ribbon loading, and it accommodates different label sizes and types.
Compatibility: It’s compatible with various label design software and can work with different barcode symbologies.
User-Friendly Interface: The printer usually has an intuitive control panel for easy configuration and operation.

Keep in mind that the specific features and capabilities of the Zebra 105SL printer may vary depending on the model and configuration, as there may be different versions or variations of this printer available. It’s a popular choice in industries where durable and high-quality label printing is essential for operations and inventory management.

How to solve the Zebra 105sl error code paper out issue

Possible Cause: Media is not loaded or loaded incorrectly.

Solution: Load media correctly. Loading media in a Zebra 105SL printer involves a few steps. Please note that this is a general guide, and you should always refer to the specific instructions in your printer’s manual for the most accurate guidance. Here’s a basic overview of how to load media into a Zebra 105SL printer:

• Prepare Your Media:
  – Ensure that you have the correct type and size of label or media for your printer.
  – Remove any old labels or media from the printer.
• Open the Media Door:
  – Locate the media door on the front of the printer.
  – Open the door to access the media path.
• Adjust the Media Guides:
  – Most Zebra printers have adjustable media guides on the inside of the media path. Adjust these guides to match the width of your media.
• Load the Media:
  – Insert the roll of media into the media path with the leading edge facing the front of the printer.
  – Ensure that the media is inserted between the adjustable media guides.
  – Depending on your label setup, you might need to thread the media under or over various guides and sensors.
• Adjust the Printhead Pressure (Optional):
  – If necessary, adjust the printhead pressure. This is typically done using the printhead pressure adjustment dial on the top of the printhead mechanism.
• Close the Media Door:
  – Carefully close the media door, ensuring that the media is properly fed through the printer.
• Calibrate the Media (Optional):
  – Some Zebra printers require you to perform a media calibration after loading new media. Refer to your printer’s manual for instructions on how to do this.
• Connect and Power On:
  – Connect the printer to your computer or network and power it on.
• Configure Your Printer:
  – Install the necessary printer drivers and configure the printer settings on your computer.
• Test and Print:
  – Test the printer by sending a test label or document to print. Ensure that the labels are printing correctly and are properly aligned.

Always consult your printer’s user manual for specific instructions related to your model, as the process can vary slightly between different versions of the Zebra 105SL printer.

Possible Cause: Misaligned media sensor.

Solution: Check position of media sensor.

Possible Cause: The printer is set for noncontinuous media, but continuous media is loaded.