Error Codes

Datamax-O’Neil H-Class H-4310X Error Code Dot Failure

Problem Description: Defective printhead elements have been detected Corrective Action: Replace the printhead if print quality becomes unacceptable.

Datamax-O’Neil H-Class H-4310X Error Code 24V Out of Tolerance

Problem Description: The printer has detected a drop in the 24-volt power supply Corrective Action: No action is required. If…

Datamax-O’Neil H-Class H-6210 Error Code Top of Form Fault

Problem Description: The printer could not find a TOF mark within the maximum length setting, or TOF was encountered in…

Datamax-O’Neil H-Class H-4606X Error Code Top of Form Fault

Problem Description: The printer could not find a TOF mark within the maximum length setting, or TOF was encountered in…

Datamax-O’Neil H-Class H-4606X Error Code Temperature Fault

Problem Description: The printer has shutdown due to the printhead temperature. Corrective Action: Turn OFF the printer. Ensure that the…

Datamax-O’Neil H-Class H-4606X Error Code Ribbon Fault

Problem Description: Two causes are possible: 1) The Thermal Transfer media type has been selected, but no ribbon movement or…

Datamax-O’Neil H-Class H-4606X Error Code Rewinder Full

Problem Description: The internal rewinder is at capacity and has stopped turning. Corrective Action: Unload the internal rewinder then press…

Datamax-O’Neil H-Class H-4606X Error Code Rewinder Fault

Problem Description: No rewinder movement is detected. Corrective Action: Examine the rewinder then proceed accordingly: 1) If full, unload the…

Datamax-O’Neil H-Class H-4606X Error Code Reflective Mode Faulty Sensor

Problem Description: Consistently high sensor readings were detected. Corrective Action: Press any key to continue. Ensure that media was removed…

Datamax-O’Neil H-Class H-4606 Error Code Refelective Mode Cannot Calibrate

Problem Description: Consistently low sensor readings were detected. Corrective Action: Press any key to continue. Ensure that the reflective mark…

800-643-2664